SUNKEY-Fusion : The best value 3in1 COMBO chip!
SunKey Fusion 3in1 SPEC:
|
|
SunKey Fusion 3in1 - SunKey Mode |
How to instill it in Sun-Key Mode? #1. Link these 3 FPC correctly #2. Link it to DVD drive, and use 3M sticker to stick it to Wii #3. Let the Upgrade/Switch FPC out, then re-assemble your Wii, the installation complete! You don't need setup anything again, because SunKey have the A.I. BOOT function, can auto setup the region and DVD drive type, what you need to do just inset your DVD to play. And sure, SunKey Fusion support NDP upgrade, we will keep to release the new core to support new function for SunKey and D2SUN mode, to let your chip up to day , just like how we support BCA protection in the past few month through core upgrading. |
SunKey Fusion 3in1 - D2Sun Mode |
How to instill it in D2Sun Mode? #1. All SunKey Fusion comes with the genuine Wii-Clip , it support all DMS/D2A/D2B/D2C2/D2E DVD drives. #2. What you need to do, just put it cover to the chipset, and use 3M sticker to stick it to Wii stable! |
SunKey Fusion 3in1 - Fusion Mode |
How to instill it in Fusion Mode? #1. Follow this install diagram, to solder 4 wires to Q,A,B,K points: #2. Solder these 4 wires to SunKey Fusion too: #3. After the soldering complete, link it to the DVD drive and Wii , and use 3M sticker to stick it to Wii stable! How to use the external switch to select the 3X / 6X speed mode: 3X: If set the switch to SunKey, then it will run at 3X speed, and the 6X RED LED will OFF. 6X: If set the switch to D2SUN, then it will run at 6X speed, and the 6X RED LED will ON. Click here to download the PSD format Sunkey-Fusion image |
Powered by D2SUN Team 2010~2016